Click on Data Admin>Tools to navigate to the list of available Parts. Tools are generally added as part of developing a WIN Task. This function is primarily around managing the full list of tools that have been included in the system.
To add a new Tool, click on and the Add Tool pop-up window is displayed.
Enter the information using the following guide for an OEM or Non-OEM type tools:
|FIELD||OEM Type||NON-OEM Type|
|OEM Tool Number||Enter the tool number as supplied by the OEM.||Type “ — ” (two dashes) to add a generic tool.|
|Description||Enter the tool description as supplied by the OEM.||Enter the generic tool description.|
|Tool Image||Enter the URL path for the image to be used or leave blank.||Enter the URL path for the image to be used or leave blank.|
Click on to add the new entry to the list.
GUIDE TO ADDING NEW TOOLS
Note: Use the search feature by clicking in and entering related text. It is good for finding if like information exists before creating new entries.
When adding New Tools to the database it is best to think about what the description of the tool should be. AssetOn recommends not using Brand names unless it is a specific or special tool from the manufacturer. Below is a guide to tools that may be non-specific to a manufacturer.
|SPECIFIC TOOL||NAME TO BE USED|
|Loctite 262||Thread locker|
|Hytorc Wrench||Hydraulic Torque Wrench (Rated Capacity)|
|Edmo Jack||Hydraulic Jack (Rated Capacity)|
|Loctite Anti Seize||Anti-Seize Compound|
|6V-6146 Load Levelling Beam||Suitable Load Levelling Beam (Rated Capacity)|
|138-7573 Link Bracket||Suitable Lifting Link (Rated Capacity)|
|Omnifit / Silastic||Sealant|